In general, automation is most effectively applied to repetitive tasks, such as production loading and trucking. The significant presence of these highly repetitive tasks in a cave mining environment make automation particularly attractive. The increasing automation of mining equipment is the natural evolution of basic tele-remote operation. The primary benefit of tele-remote mining is in... Continue reading.
In sublevel caving operations, it is imperative that the production blastholes be drilled accurately so that there is no risk of unblasted ore remaining between adjacent drawpoints. Post-drilling assessment is the process of mitigating this risk by verifying that blastholes have been drilled accurately with the correct length and orientation, following the blast design. Although... Continue reading.
Mudrush, mudflow, or mudpush are the most common terms describing uncontrolled ingress of assorted mixture of water and solids. Mudrush is the underground equivalent of surface debris flow. It can have different origins but produce the same results: injury, loss of life, damage to property, excess dilution, and production delays, or — in extreme cases... Continue reading.
SRK performed a comprehensive redevelopment of the geotechnical model for an existing large panel caving operation with the aim of assisting cave planning and design in five future cave blocks. Initially, separate models were created for the individual blocks to allow for smaller, more focused models; however, a large all-encompassing model was subsequently created. The... Continue reading.
Many ore deposits extend vertically, a fact which is not always known at the start of mining. If initial mining is by opencast methods and ore reserves are proven to greater depths, the pits are often planned to go deeper than originally envisaged. In such cases, surface plants and critical underground facilities — conveyor tunnels,... Continue reading.